Check if any of the cartridges are damaged and change them with new ones.
See if the ink level in the cartridges is low and replace the cartridge if required.Read the solutions given below to solve it. Various reasons cause the error code 5200. Sometimes, you cannot remove the paper stuck in the paper output tray, so open the transport unit and take it out.If it is hard to pull the paper out, turn off the printer, and then turn on to see if the printer ejects the paper.If you can see the paper that is stuck, use both the hands to slowly pull out the paper.Take off all the paper from the tray and restart the printer.Disable it to bring the printer back online. In the window that opens, click the Printer menu and then see if Use Printer Offline is enabled.Right-click it and select the See what’s printing option. On the computer (Windows) connected to the printer, open the Control Panel window and find your printer.Otherwise, shift the Canon printer to a location where the signal is good. See if the Wi-Fi network signal is strong.Check the wireless network connection by printing a network settings page. Make sure the printer is connected to the network.When your Canon PIXMA MX452 printer goes offline, try the below solutions. Finish the software installation and follow the guided instructions to complete the setup.Click Other Methods and then choose Standard setup as the connection method.Select Network Connection > Wireless Connection > Connect to the network.If the system prompts to enter the username and password, input the credentials. Allow the software installer to make changes to the computer.When the Setup window appears, click Next to proceed.Insert the installation CD on your computer and begin the installation.Select your network name as the access point and enter the password.Choose Standard Setup and the printer will start to detect the available networks.Use the navigation keys to move to the Wireless LAN setup menu and press the OK button to select it.Turn the printer on and press the Setup button to view the different setup menus.Turn on your Wi-Fi router, connect the computer to it, and write down the Wi-Fi network name (SSID) and password.
0 kommentar(er)
